It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

Features:

  • The Dude is free of charge
  • Auto network discovery and layout
  • Discovers any type or brand of device
  • Device, Link monitoring, and notifications
  • Includes SVG icons for devices, and supports custom icons and backgrounds
  • Easy installation and usage
  • Allows you to draw your own maps and add custom devices
  • Supports SNMP, ICMP, DNS and TCP monitoring for devices that support it
  • Individual Link usage monitoring and graphs
  • Direct access to remote control tools for device management
  • Supports remote Dude server and local client
  • Runs in Linux Wine enviroment, MacOS Darwine, and Windows
  • Best price/value ratio compared to other products (free of charge)

What’s New:

cloud – added command “/system backup cloud” for backup storing on cloud (CLI only)

ipsec – added new “identity” menu with common peer distinguishers

ipsec – removed “main-l2tp” exchange-mode, it is the same as “main” exchange-mode

ipsec – removed “users” menu, XAuth user configuration is now handled by “identity” menu

radius – initial implementation of RadSec (RADIUS communication over TLS)

speedtest – added “/tool speed-test” for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only)

Changes in this release:

bgp – properly update keepalive time after peer restart

bridge – added option to monitor fast-forward status

bridge – count routed FastPath packets between bridge ports under FastPath bridge statistics

bridge – disable fast-forward when using SlowPath features

bridge – fixed BOOTP packet forwarding when DHCP Snooping is enabled

bridge – fixed DHCP Option 82 parsing when using DHCP Snooping

bridge – fixed log message when hardware offloading is being enabled

bridge – fixed packet forwarding when changing MSTI VLAN mappings

bridge – fixed packet forwarding with enabled DHCP Snooping and Option 82

bridge – fixed possible memory leak when using MSTP

bridge – fixed system’s identity change when DHCP Snooping is enabled (introduced in v6.43)

bridge – improved packet handling when hardware offloading is being disabled

bridge – improved packet processing when bridge port changes states

btest – added multithreading support for both UDP and TCP tests

btest – added warning message when CPU load exceeds 90% (CLI only)

capsman – always accept connections from loopback address

certificate – added support for multiple “Subject Alt. Names”

certificate – enabled RC2 cipher to allow P12 certificate decryption

certificate – fixed certificate signing by SCEP client if multiple CA certificates are provided

certificate – show digest algorithm used in signature

chr – assign interface names based on underlying PCI device order on KVM

chr – distribute NIC queue IRQ’s evenly across all CPUs

chr – fixed IRQ balancing when using more than 32 CPUs

chr – improved system stability when insufficient resources are allocated to the guest

cloud – added “ddns-update-interval” parameter

cloud – do not reuse old UDP socket if routing changes are detected

cloud – ignore “force-update” command if DDNS is disabled

cloud – improved DDNS service disabling

cloud – made address updating faster when new public address detected

conntrack – added new “loose-tcp-tracking” parameter (equivalent to “nf_conntrack_tcp_loose” in netfilter)

console – renamed IP protocol 41 to “ipv6-encap”

console – updated copyright notice

crs317 – fixed packet forwarding when LACP is used with hw=no

crs3xx – fixed packet forwarding through SFP+ ports when using 100Mbps link speed

crs3xx – improved fan control stability

defconf – fixed configuration not generating properly on upgrade

defconf – fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN

defconf – fixed IPv6 link-local address range in firewall rules

dhcp – added “allow-dual-stack-queue” setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour

dhcp – properly load DHCP configuration if options are configured

dhcpv4-server – added “parent-queue” parameter (CLI only)

dhcpv4-server – added “User-Name” attribute to RADIUS accounting messages

dhcpv4-server – fixed service becoming unresponsive after interface leaves and enters the same bridge

dhcpv4-server – use ARP for conflict detection

dhcpv6-client – use default route distance also for unreachable route added by DHCPv6 client

dhcpv6-server – allow to add DHCPv6 server with pool that does not exist

dhcpv6-server – fixed missing gateway for binding’s network if RADIUS authentication was used

dhcpv6-server – improved DHCPv6 server stability when using “print” command

dhcpv6-server – show “client-address” parameter for bindings

discovery – detect proper slave interface on bounded interfaces

discovery – fixed malformed neighbor information for routers that has incomplete IPv6 configuration

discovery – send master port in “interface-name” parameter

discovery – show neighbors on actual bridge port instead of bridge itself for LLDP

e-mail – added info log message when e-mail is sent successfully

ethernet – added “tx-rx-1024-max” counter to Ethernet stats

ethernet – fixed IPv4 and IPv6 packet forwarding on IPQ4018 devices

ethernet – fixed linking issues on wAP ac, RB750Gr2 and Metal 52 ac (introduced in v6.43rc52)

ethernet – fixed packet forwarding when SFP interface is disabled on hEX S

ethernet – fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices

ethernet – improved per core ethernet traffic classificator on mmips devices

export – fixed “silent-boot” compact export

fetch – added “http-header-field” parameter

fetch – added option to specify multiple headers under “http-header-field”, including content type

fetch – fixed “without-paging” option

fetch – improved file downloading to slow memory

fetch – improved stability when using HTTP mode

fetch – removed “http-content-type” parameter

gps – increase precision for dd format

gps – moved “coordinate-format” from “monitor” command to “set” parameter

health – improved fan control stability on CRS328-24P-4S+RM

hotspot – added “https-redirect” under server profiles

hotspot – added per-user NAT rule generation based on “incoming-filter” and “outgoing-filter” parameters

ike1 – do not allow using RSA-key and RSA-signature authentication methods simultaneously on single peer

ike1 – fixed memory leak

ike2 – added option to specify certificate chain

ike2 – added peer identity validation for RSA auth (disabled after upgrade)

ike2 – allow to match responder peer by “my-id=fqdn” field

ike2 – fixed local address lookup when initiating new connection

ike2 – improved subsequent phase 2 initialization when no childs exist

ike2 – properly handle certificates with empty “Subject”

ike2 – retry RSA signature validation with deduced digest from certificate

ike2 – send split networks over DHCP (option 249) to Windows initiators if DHCP Inform is received

ike2 – show weak pre-shared-key warning

interface – added “pwr-line” interface support (more information will follow in next newsletter)

ipsec – added account log message when user is successfully authenticated

ipsec – added basic pre-shared-key strength checks

ipsec – added new “remote-id” peer matcher

ipsec – allow to specify single address instead of IP pool under “mode-config”

ipsec – fixed active connection killing when changing peer configuration

ipsec – fixed all policies not getting installed after startup (introduced in v6.43.8)

ipsec – fixed stability issues after changing peer configuration (introduced in v6.43)

ipsec – hide empty prefixes on “peer” menu

ipsec – improved invalid policy handling when a valid policy is uninstalled

ipsec – made dynamic “src-nat” rule more specific

ipsec – made peers autosort themselves based on reachability status

ipsec – moved “profile” menu outside “peer” menu

ipsec – properly detect AES-NI extension as hardware AEAD

ipsec – removed limitation that allowed only single “auth-method” with the same “exchange-mode” as responder

ipsec – require write policy for key generation

kidcontrol – added IPv6 support

kidcontrol – added “reset-counters” command for “device” menu (CLI only)

kidcontrol – added statistics web interface for kids (http://router.lan/kid-control)

kidcontrol – added “tur-fri”, “tur-mon”, “tur-sat”, “tur-sun”, “tur-thu”, “tur-tue”, “tur-wed” parameters

kidcontrol – dynamically discover devices from DNS activity

kidcontrol – fixed validation checks for time intervals

kidcontrol – properly detect time zone changes

kidcontrol – use “/128” prefix-length for IPv6 addresses

l2tp – fixed IPsec secret not being updated when “ipsec-secret” is changed under L2TP client configuration

lcd – made “pin” parameter sensitive

led – fixed default LED configuration for RBSXTsq-60ad

led – fixed default LED configuration for wAP 60G AP devices

led – fixed PWR-LINE AP Ethernet LED polarity (“/system routerboard upgrade” required)

lldp – fixed missing capabilities fields on some devices

lte – added additional ID support for Novatel USB730L modem

lte – added “cell-monitor” command for R11e-LTE international modem (CLI only)

lte – added “ecno” field for “info” command

lte – added “firmware-upgrade” command for R11e-LTE international modems (CLI only)

lte – added initial support for multiple APN for R11e-4G (new modem firmware required)

lte – added initial support for Telit LN940

lte – added multiple APN support for R11e-4G

lte – added option to lock the LTE operator

lte – added support for JioFi JMR1040 modem

lte – fixed connection issue when LTE modem was de-registered from network for more than 1 minute

lte – fixed DHCP IP acquire (introduced in v6.43.7)

lte – fixed DHCP relay packet forwarding when in passthrough mode

lte – fixed IPv6 activation for R11e-LTE-US modems

lte – fixed Jaton/SQN modems preventing router from booting properly

lte – fixed LTE interface not working properly after reboot on RBSXTLTE3-7

lte – fixed missing running (R) flag for Jaton LTE modems

lte – fixed passthrough DHCP address forward when other address is acquired from operator

lte – fixed reported “rsrq” precision (introduced in v6.43.8)

lte – improved compatibility for Alt38xx modems

lte – improved SIM7600 initialization after reset

lte – improved SimCom 7100e support

lte – query “cfun” on initialization

lte – require write policy for at-chat

lte – update firmware version information after R11e-LTE/R11e-4G firmware upgrade

netinstall – do not show kernel failure critical messages in the log after fresh install

ntp-client – fixed “dst-active” and “gmt-offset” being updated after synchronization with server

port – improved “remote-serial” TCP performance in RAW mode

ppp – added “at-chat” command

ppp – fixed dynamic route creation towards VPN server when “add-default-route” is used

profiler – classify kernel crypto processing as “encrypting”

profile – removed obsolete “file-name” parameter

proxy – removed port list size limit

radius – implemented Proxy-State attribute handling in CoA and disconnect requests

rb3011 – implemented multiple engine IPsec hardware acceleration support

rb4011 – fixed SFP+ interface full duplex and speed parameter behavior

rb4011 – improved SFP+ interface linking to 1Gbps

rbm33g – improved stability when used with some USB devices

romon – improved reliability when processing RoMON packets on CHR

routerboard – removed “RB” prefix from PWR-LINE AP devices

routerboard – require at least 10 second interval between “reformat-hold-button” and “max-reformat-hold-button”

smb – added commenting option for SMB users (CLI only)

smb – fixed macOS clients not showing share contents

smb – fixed Windows 10 clients not able to establish connection to share

sniffer – save packet capture in “802.11” type when sniffing on w60g interface in “sniff” mode

snmp – added “dot1qPortVlanTable” and “dot1dBasePortTable” OIDs

snmp – changed fan speed value type to Gauge32

snmp – fixed “rsrq” reported precision

snmp – fixed w60g station table

snmp – removed “rx-sector” (“Wl60gRxSector”) value

snmp – report bridge ifSpeed as “0”

snmp – report ifSpeed 0 for sub-layer interfaces

ssh – added “allow-none-crypto” parameter to disable “none” encryption usage (CLI only)

ssh – added error log message when key exchange fails

ssh – close active SSH connections before IPsec connections on shutdown

ssh – fixed public key format compatibility with RFC4716

supout – fixed “poe-out” output not showing all interfaces

supout – fixed Profile output on single core devices

switch – added comment field to switch ACL rules

switch – fixed ACL rules on IPQ4018 devices

system – accept only valid path for “log-file” parameter in “port” menu

system – removed obsolete “/driver” command

tr069-client – added “check-certificate” parameter to allow communication without certificates

tr069-client – added “connection-request-port” parameter (CLI only)

tr069-client – added support for InformParameter object

tr069-client – fixed certificate verification for certificates with IP address

tr069-client – fixed HTTP cookie getting duplicated with the same key

tr069-client – increased reported “rsrq” precision

traceroute – improved stability when sending large ping amounts

traffic-flow – reduced minimal value of “active-flow-timeout” parameter to 1s

tunnel – properly clear dynamic IPsec configuration when removing/disabling EoIP with DNS as “remote-address”

upgrade – made security package depend on DHCP package

usb – improved power-reset error message when no bus specified on CCR1072-8G-1S+

usb – improved USB device powering on startup for hAP ac^2 devices

usb – increased default power-reset timeout to 5 seconds

userman – added first and last name fields for signup form

userman – show redirect location in error messages

user – require “write” permissions for LTE firmware update

vrrp – made “password” parameter sensitive

w60g – added “10s-average-rssi” parameter to align mode (CLI only)

w60g – added align mode “/interface w60g align” (CLI only)

w60g – fixed scan in bridge mode

w60g – improved PtMP performance

w60g – improved reconnection detection

w60g – improved “tx-packet-error-rate” reading

w60g – renamed disconnection message when license level did not allow more connected clients

w60g – renamed “frequency-list” to “scan-list”

watchdog – allow specifying DNS name for “send-smtp-server” parameter

webfig – improved file handling

winbox – added 4th chain selection for “HT TX chains” and “HT RX chains” under “CAPsMAN/CAP Interface/Wireless” tab

winbox – added “allow-dual-stack-queue” parameter in “IP/DHCP Server” and “IPv6/DHCP Server” menus

winbox – added “challenge-password” field when signing certificate with SCEP

winbox – added “conflict-detection” parameter in “IP/DHCP Server” menu

winbox – added “coordinate-format” parameter in LTE interface settings

winbox – added “radio-name” setting to “CAPsMAN/CAP Interface/General” tab

winbox – added “secondary-channel” setting to “CAPsMAN/CAP Interface/Channel” tab

winbox – added src/dst address and in/out interface list columns to default firewall menu view

winbox – added support for dynamic devices in “IP/Kid Control/Devices” tab

winbox – allow setting “network-mode” to “auto” under LTE interface settings

winbox – allow specifying interface lists in “CAPsMAN/Access List” menu

winbox – fixed “IPv6/Firewall” “Connection limit” parameter not allowing complete IPv6 prefix lengths

winbox – fixed L2MTU parameter setting on “W60G” type interfaces

winbox – fixed “LCD” menu not shown on RB2011UiAS-2HnD

winbox – fixed missing w60g interface status values

winbox – improved file handling

winbox – moved “Too Long” statistics counter to Ethernet “Rx Stats” tab

winbox – organized wireless parameters between simple and advanced modes

winbox – renamed “Default AP Tx Rate” to “Default AP Tx Limit”

winbox – renamed “Default Client Tx Rate” to “Default Client Tx Limit”

winbox – show “R” flag under “IPv6/DHCP Server/Bindings” tab

winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature

winbox – show “W60G” wireless tab on wAP 60G AP

wireless – added new “installation” parameter to specify router’s location

wireless – improved AR5212 response to incoming ACK frames

wireless – improved connection stability for new model Apple devices

wireless – improved NV2 performance for all ARM devices

wireless – improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac (“/system routerboard upgrade” required)

wireless – improved system stability for all ARM devices with wireless

wireless – improved system stability for all devices with 802.11ac wireless

wireless – improved system stability when scanning for other networks

wireless – removed G/N support for 2484MHz in “japan” regulatory domain

wireless – report last seen IP address in RADIUS accounting messages

wireless – show “installation” parameter when printing configuration

Changes in this release:

  • bgp – properly update keepalive time after peer restart
  • bridge – added option to monitor fast-forward status
  • bridge – count routed FastPath packets between bridge ports under FastPath bridge statistics
  • bridge – disable fast-forward when using SlowPath features
  • bridge – fixed BOOTP packet forwarding when DHCP Snooping is enabled
  • bridge – fixed DHCP Option 82 parsing when using DHCP Snooping
  • bridge – fixed log message when hardware offloading is being enabled
  • bridge – fixed packet forwarding when changing MSTI VLAN mappings
  • bridge – fixed packet forwarding with enabled DHCP Snooping and Option 82
  • bridge – fixed possible memory leak when using MSTP
  • bridge – fixed system’s identity change when DHCP Snooping is enabled (introduced in v6.43)
  • bridge – improved packet handling when hardware offloading is being disabled
  • bridge – improved packet processing when bridge port changes states
  • btest – added multithreading support for both UDP and TCP tests
  • btest – added warning message when CPU load exceeds 90% (CLI only)
  • capsman – always accept connections from loopback address
  • certificate – added support for multiple “Subject Alt. Names”
  • certificate – enabled RC2 cipher to allow P12 certificate decryption
  • certificate – fixed certificate signing by SCEP client if multiple CA certificates are provided
  • certificate – show digest algorithm used in signature
  • chr – assign interface names based on underlying PCI device order on KVM
  • chr – distribute NIC queue IRQ’s evenly across all CPUs
  • chr – fixed IRQ balancing when using more than 32 CPUs
  • chr – improved system stability when insufficient resources are allocated to the guest
  • cloud – added “ddns-update-interval” parameter
  • cloud – do not reuse old UDP socket if routing changes are detected
  • cloud – ignore “force-update” command if DDNS is disabled
  • cloud – improved DDNS service disabling
  • cloud – made address updating faster when new public address detected
  • conntrack – added new “loose-tcp-tracking” parameter (equivalent to “nf_conntrack_tcp_loose” in netfilter)
  • console – renamed IP protocol 41 to “ipv6-encap”
  • console – updated copyright notice
  • crs317 – fixed packet forwarding when LACP is used with hw=no
  • crs3xx – fixed packet forwarding through SFP+ ports when using 100Mbps link speed
  • crs3xx – improved fan control stability
  • defconf – fixed configuration not generating properly on upgrade
  • defconf – fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN
  • defconf – fixed IPv6 link-local address range in firewall rules
  • dhcp – added “allow-dual-stack-queue” setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour
  • dhcp – properly load DHCP configuration if options are configured
  • dhcpv4-server – added “parent-queue” parameter (CLI only)
  • dhcpv4-server – added “User-Name” attribute to RADIUS accounting messages
  • dhcpv4-server – fixed service becoming unresponsive after interface leaves and enters the same bridge
  • dhcpv4-server – use ARP for conflict detection
  • dhcpv6-client – use default route distance also for unreachable route added by DHCPv6 client
  • dhcpv6-server – allow to add DHCPv6 server with pool that does not exist
  • dhcpv6-server – fixed missing gateway for binding’s network if RADIUS authentication was used
  • dhcpv6-server – improved DHCPv6 server stability when using “print” command
  • dhcpv6-server – show “client-address” parameter for bindings
  • discovery – detect proper slave interface on bounded interfaces
  • discovery – fixed malformed neighbor information for routers that has incomplete IPv6 configuration
  • discovery – send master port in “interface-name” parameter
  • discovery – show neighbors on actual bridge port instead of bridge itself for LLDP
  • e-mail – added info log message when e-mail is sent successfully
  • ethernet – added “tx-rx-1024-max” counter to Ethernet stats
  • ethernet – fixed IPv4 and IPv6 packet forwarding on IPQ4018 devices
  • ethernet – fixed linking issues on wAP ac, RB750Gr2 and Metal 52 ac (introduced in v6.43rc52)
  • ethernet – fixed packet forwarding when SFP interface is disabled on hEX S
  • ethernet – fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices
  • ethernet – improved per core ethernet traffic classificator on mmips devices
  • export – fixed “silent-boot” compact export
  • fetch – added “http-header-field” parameter
  • fetch – added option to specify multiple headers under “http-header-field”, including content type
  • fetch – fixed “without-paging” option
  • fetch – improved file downloading to slow memory
  • fetch – improved stability when using HTTP mode
  • fetch – removed “http-content-type” parameter
  • gps – increase precision for dd format
  • gps – moved “coordinate-format” from “monitor” command to “set” parameter
  • health – improved fan control stability on CRS328-24P-4S+RM
  • hotspot – added “https-redirect” under server profiles
  • hotspot – added per-user NAT rule generation based on “incoming-filter” and “outgoing-filter” parameters
  • ike1 – do not allow using RSA-key and RSA-signature authentication methods simultaneously on single peer
  • ike1 – fixed memory leak
  • ike2 – added option to specify certificate chain
  • ike2 – added peer identity validation for RSA auth (disabled after upgrade)
  • ike2 – allow to match responder peer by “my-id=fqdn” field
  • ike2 – fixed local address lookup when initiating new connection
  • ike2 – improved subsequent phase 2 initialization when no childs exist
  • ike2 – properly handle certificates with empty “Subject”
  • ike2 – retry RSA signature validation with deduced digest from certificate
  • ike2 – send split networks over DHCP (option 249) to Windows initiators if DHCP Inform is received
  • ike2 – show weak pre-shared-key warning
  • interface – added “pwr-line” interface support (more information will follow in next newsletter)
  • ipsec – added account log message when user is successfully authenticated
  • ipsec – added basic pre-shared-key strength checks
  • ipsec – added new “remote-id” peer matcher
  • ipsec – allow to specify single address instead of IP pool under “mode-config”
  • ipsec – fixed active connection killing when changing peer configuration
  • ipsec – fixed all policies not getting installed after startup (introduced in v6.43.8)
  • ipsec – fixed stability issues after changing peer configuration (introduced in v6.43)
  • ipsec – hide empty prefixes on “peer” menu
  • ipsec – improved invalid policy handling when a valid policy is uninstalled
  • ipsec – made dynamic “src-nat” rule more specific
  • ipsec – made peers autosort themselves based on reachability status
  • ipsec – moved “profile” menu outside “peer” menu
  • ipsec – properly detect AES-NI extension as hardware AEAD
  • ipsec – removed limitation that allowed only single “auth-method” with the same “exchange-mode” as responder
  • ipsec – require write policy for key generation
  • kidcontrol – added IPv6 support
  • kidcontrol – added “reset-counters” command for “device” menu (CLI only)
  • kidcontrol – added statistics web interface for kids (http://router.lan/kid-control)
  • kidcontrol – added “tur-fri”, “tur-mon”, “tur-sat”, “tur-sun”, “tur-thu”, “tur-tue”, “tur-wed” parameters
  • kidcontrol – dynamically discover devices from DNS activity
  • kidcontrol – fixed validation checks for time intervals
  • kidcontrol – properly detect time zone changes
  • kidcontrol – use “/128” prefix-length for IPv6 addresses
  • l2tp – fixed IPsec secret not being updated when “ipsec-secret” is changed under L2TP client configuration
  • lcd – made “pin” parameter sensitive
  • led – fixed default LED configuration for RBSXTsq-60ad
  • led – fixed default LED configuration for wAP 60G AP devices
  • led – fixed PWR-LINE AP Ethernet LED polarity (“/system routerboard upgrade” required)
  • lldp – fixed missing capabilities fields on some devices
  • lte – added additional ID support for Novatel USB730L modem
  • lte – added “cell-monitor” command for R11e-LTE international modem (CLI only)
  • lte – added “ecno” field for “info” command
  • lte – added “firmware-upgrade” command for R11e-LTE international modems (CLI only)
  • lte – added initial support for multiple APN for R11e-4G (new modem firmware required)
  • lte – added initial support for Telit LN940
  • lte – added multiple APN support for R11e-4G
  • lte – added option to lock the LTE operator
  • lte – added support for JioFi JMR1040 modem
  • lte – fixed connection issue when LTE modem was de-registered from network for more than 1 minute
  • lte – fixed DHCP IP acquire (introduced in v6.43.7)
  • lte – fixed DHCP relay packet forwarding when in passthrough mode
  • lte – fixed IPv6 activation for R11e-LTE-US modems
  • lte – fixed Jaton/SQN modems preventing router from booting properly
  • lte – fixed LTE interface not working properly after reboot on RBSXTLTE3-7
  • lte – fixed missing running (R) flag for Jaton LTE modems
  • lte – fixed passthrough DHCP address forward when other address is acquired from operator
  • lte – fixed reported “rsrq” precision (introduced in v6.43.8)
  • lte – improved compatibility for Alt38xx modems
  • lte – improved SIM7600 initialization after reset
  • lte – improved SimCom 7100e support
  • lte – query “cfun” on initialization
  • lte – require write policy for at-chat
  • lte – update firmware version information after R11e-LTE/R11e-4G firmware upgrade
  • netinstall – do not show kernel failure critical messages in the log after fresh install
  • ntp-client – fixed “dst-active” and “gmt-offset” being updated after synchronization with server
  • port – improved “remote-serial” TCP performance in RAW mode
  • ppp – added “at-chat” command
  • ppp – fixed dynamic route creation towards VPN server when “add-default-route” is used
  • profiler – classify kernel crypto processing as “encrypting”
  • profile – removed obsolete “file-name” parameter
  • proxy – removed port list size limit
  • radius – implemented Proxy-State attribute handling in CoA and disconnect requests
  • rb3011 – implemented multiple engine IPsec hardware acceleration support
  • rb4011 – fixed SFP+ interface full duplex and speed parameter behavior
  • rb4011 – improved SFP+ interface linking to 1Gbps
  • rbm33g – improved stability when used with some USB devices
  • romon – improved reliability when processing RoMON packets on CHR
  • routerboard – removed “RB” prefix from PWR-LINE AP devices
  • routerboard – require at least 10 second interval between “reformat-hold-button” and “max-reformat-hold-button”
  • smb – added commenting option for SMB users (CLI only)
  • smb – fixed macOS clients not showing share contents
  • smb – fixed Windows 10 clients not able to establish connection to share
  • sniffer – save packet capture in “802.11” type when sniffing on w60g interface in “sniff” mode
  • snmp – added “dot1qPortVlanTable” and “dot1dBasePortTable” OIDs
  • snmp – changed fan speed value type to Gauge32
  • snmp – fixed “rsrq” reported precision
  • snmp – fixed w60g station table
  • snmp – removed “rx-sector” (“Wl60gRxSector”) value
  • snmp – report bridge ifSpeed as “0”
  • snmp – report ifSpeed 0 for sub-layer interfaces
  • ssh – added “allow-none-crypto” parameter to disable “none” encryption usage (CLI only)
  • ssh – added error log message when key exchange fails
  • ssh – close active SSH connections before IPsec connections on shutdown
  • ssh – fixed public key format compatibility with RFC4716
  • supout – fixed “poe-out” output not showing all interfaces
  • supout – fixed Profile output on single core devices
  • switch – added comment field to switch ACL rules
  • switch – fixed ACL rules on IPQ4018 devices
  • system – accept only valid path for “log-file” parameter in “port” menu
  • system – removed obsolete “/driver” command
  • tr069-client – added “check-certificate” parameter to allow communication without certificates
  • tr069-client – added “connection-request-port” parameter (CLI only)
  • tr069-client – added support for InformParameter object
  • tr069-client – fixed certificate verification for certificates with IP address
  • tr069-client – fixed HTTP cookie getting duplicated with the same key
  • tr069-client – increased reported “rsrq” precision
  • traceroute – improved stability when sending large ping amounts
  • traffic-flow – reduced minimal value of “active-flow-timeout” parameter to 1s
  • tunnel – properly clear dynamic IPsec configuration when removing/disabling EoIP with DNS as “remote-address”
  • upgrade – made security package depend on DHCP package
  • usb – improved power-reset error message when no bus specified on CCR1072-8G-1S+
  • usb – improved USB device powering on startup for hAP ac^2 devices
  • usb – increased default power-reset timeout to 5 seconds
  • userman – added first and last name fields for signup form
  • userman – show redirect location in error messages
  • user – require “write” permissions for LTE firmware update
  • vrrp – made “password” parameter sensitive
  • w60g – added “10s-average-rssi” parameter to align mode (CLI only)
  • w60g – added align mode “/interface w60g align” (CLI only)
  • w60g – fixed scan in bridge mode
  • w60g – improved PtMP performance
  • w60g – improved reconnection detection
  • w60g – improved “tx-packet-error-rate” reading
  • w60g – renamed disconnection message when license level did not allow more connected clients
  • w60g – renamed “frequency-list” to “scan-list”
  • watchdog – allow specifying DNS name for “send-smtp-server” parameter
  • webfig – improved file handling
  • winbox – added 4th chain selection for “HT TX chains” and “HT RX chains” under “CAPsMAN/CAP Interface/Wireless” tab
  • winbox – added “allow-dual-stack-queue” parameter in “IP/DHCP Server” and “IPv6/DHCP Server” menus
  • winbox – added “challenge-password” field when signing certificate with SCEP
  • winbox – added “conflict-detection” parameter in “IP/DHCP Server” menu
  • winbox – added “coordinate-format” parameter in LTE interface settings
  • winbox – added “radio-name” setting to “CAPsMAN/CAP Interface/General” tab
  • winbox – added “secondary-channel” setting to “CAPsMAN/CAP Interface/Channel” tab
  • winbox – added src/dst address and in/out interface list columns to default firewall menu view
  • winbox – added support for dynamic devices in “IP/Kid Control/Devices” tab
  • winbox – allow setting “network-mode” to “auto” under LTE interface settings
  • winbox – allow specifying interface lists in “CAPsMAN/Access List” menu
  • winbox – fixed “IPv6/Firewall” “Connection limit” parameter not allowing complete IPv6 prefix lengths
  • winbox – fixed L2MTU parameter setting on “W60G” type interfaces
  • winbox – fixed “LCD” menu not shown on RB2011UiAS-2HnD
  • winbox – fixed missing w60g interface status values
  • winbox – improved file handling
  • winbox – moved “Too Long” statistics counter to Ethernet “Rx Stats” tab
  • winbox – organized wireless parameters between simple and advanced modes
  • winbox – renamed “Default AP Tx Rate” to “Default AP Tx Limit”
  • winbox – renamed “Default Client Tx Rate” to “Default Client Tx Limit”
  • winbox – show “R” flag under “IPv6/DHCP Server/Bindings” tab
  • winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature
  • winbox – show “W60G” wireless tab on wAP 60G AP
  • wireless – added new “installation” parameter to specify router’s location
  • wireless – improved AR5212 response to incoming ACK frames
  • wireless – improved connection stability for new model Apple devices
  • wireless – improved NV2 performance for all ARM devices
  • wireless – improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac (“/system routerboard upgrade” required)
  • wireless – improved system stability for all ARM devices with wireless
  • wireless – improved system stability for all devices with 802.11ac wireless
  • wireless – improved system stability when scanning for other networks
  • wireless – removed G/N support for 2484MHz in “japan” regulatory domain
  • wireless – report last seen IP address in RADIUS accounting messages
  • wireless – show “installation” parameter when printing configuration


Alternatively you can download the latest beta version of this software.



Source link

https://www.buyspyequipment.com/product/car-tracker-gps-tracking-pet-auto-real-time-monitor-mini-gps-wallet-track-micro-device-global-tool-voice-recording-tools/

LEAVE A REPLY

Please enter your comment!
Please enter your name here