The “mole” aboard NASA’s InSight Mars lander has encountered stiff resistance on its first subsurface sojourn beneath the surface of the Red Planet.

In a major mission milestone, InSight’s Heat Flow and Physical Properties Package (HP3) instrument burrowed underground for the first time on Feb. 28. After 400 hammer blows over the course of four hours, the instrument apparently got between 7 inches and 19.7 inches (18 to 50 centimeters) beneath the red dirt—but obstacles slowed its progress, mission team members said.

“On its way into the depths, the mole seems to have hit a stone, tilted about 15 degrees and pushed it aside or passed it,” HP3 principal investigator Tilman Spohn, of the German Aerospace Center (known by its German acronym, DLR), said in a statement

“The mole then worked its way up against another stone at an advanced depth until the planned four-hour operating time of the first sequence expired,” Spohn added. “Tests on Earth showed that the rod-shaped penetrometer is able to push smaller stones to the side, which is very time-consuming.”

The $850 million InSight lander—whose name is short for Interior Exploration using Seismic Investigations, Geodesy and Heat Transport—touched down on Nov. 26. The spacecraft aims to map the Red Planet’s interior in unprecedented detail.

It will do this primarily by characterizing “marsquakes” and other vibrations with a suite of supersensitive seismometers, which was built by a consortium led by the French space agency CNES; and measuring subsurface heat flow with HP3, which DLR provided. 

In a Mars-exploration first, InSight placed both of these instruments directly on the Martian dirt using its robotic arm. The seismometers do their work on the surface, but HP3 needs to go down—much deeper down than it’s managed to get so far. The mission team wants the mole to get between 10 feet and 16.5 feet (3 to 5 meters) underground when all is said and done.

“The mole will pull a 5-meter-long tether equipped with temperature sensors into the Martian soil behind it,” DLR officials wrote in the same statement. “The cable is equipped with 14 temperature sensors in order to measure the temperature distribution with depth and its change with time after reaching the target depth and thus the heat flow from the interior of Mars.”

The digging process will take time, even if the mole finds its way through the current rough patch. Burrowing generates heat that would compromise HP3’s measurements, so the instrument pauses to cool off for two Mars days after each four-hour hammering session. It then records temperatures for a day before burrowing again, DLR officials said. (One Martian day, or sol, lasts about 24 hours and 40 minutes.)

InSight’s surface mission is designed to last for at least one Martian year, which is equivalent to 687 Earth days.

Copyright 2018 Space.com, a Future company. All rights reserved. This material may not be published, broadcast, rewritten or redistributed





Source link

https://www.buyspyequipment.com/product/car-tracker-gps-tracking-pet-auto-real-time-monitor-mini-gps-wallet-track-micro-device-global-tool-voice-recording-tools/

LEAVE A REPLY

Please enter your comment!
Please enter your name here